Cord Grips
Cord Grips
As you tighten these fittings, they compress to grip your cord, preventing pull out. All include a nylon inner ring and a
neoprene bushing. Temperature range is –30° to +225° F. All are UL listed and CSA certified. Choose from aluminum, zincplated steel, and nylon cord grips. To Order : Please specify material.
Steel 90° elbows have zinc-plated malleable iron bodies and zinc-plated steel outer compression nuts. Nylon grips are
gray. Liquid-tight cord grips also have a zinc-plated steel locknut and a metal-clad neoprene O-ring for the threaded end
to seal panel connections. Rated IP66 and NEMA 4X and 13 for washdowns, corrosion, oil, and coolant resistance.
Note: Trade size is an industry designation for fittings, not an actual measurement. It also designates the NPT (National
Pipe Tapered) thread size of the threaded end. When selecting a fitting, match the trade size of your knockout.
Also Available : Additional standard cord grips. Please ask for 7529K888 and specify straight or 90°, trade size, cord
diameter range, and material.
Also Available : Locknut/washer kits for standard fittings. Please ask for 7466K88 and specify NPT trade size.
Trade
STANDARD
LIQUID TIGHT
Size,
EachL
EachL
NPT
Thread OD For Cord Dia.
Aluminum Steel Nylon
Aluminum Steel
Nylon
Straights
1/4 . . . . . . . . . 0.54 . . . . . . . . . . . . . . . 0.13-0.19 . . . . . . . . . 7529K12 . . . . . $7.30
$7.60
......
3/8 . . . . . . . . . 0.68 . . . . . . . . . . . . . . . 0.19-0.25 . . . . . . . . . 7529K15 . . . . . 7.30
7.60
......
3/8 . . . . . . . . . 0.68 . . . . . . . . . . . . . . . 0.25-0.31 . . . . . . . . . 7529K1 . . . . . . . 7.30
$8.40
7.60
......
3/8 . . . . . . . . . 0.68 . . . . . . . . . . . . . . . 0.31-0.38 . . . . . . . . . 7529K2 . . . . . . . 7.30
7.60
......
3/8 . . . . . . . . . 0.68 . . . . . . . . . . . . . . . 0.38-0.44 . . . . . . . . . 7529K3 . . . . . . . 7.30
8.40
7.60
......
1/2 . . . . . . . . . 0.84 . . . . . . . . . . . . . . . 0.13-0.19 . . . . . . . . . 7529K16 . . . . . 7.60
8.60
7.90
8302K11. . . . . . $12.40
$13.60 $12.60
1/2 . . . . . . . . . 0.84 . . . . . . . . . . . . . . . 0.19-0.25 . . . . . . . . . 7529K17 . . . . . 7.60
8.60
7.90
8302K12. . . . . . 12.40
13.60
12.60
1/2 . . . . . . . . . 0.84 . . . . . . . . . . . . . . . 0.25-0.38 . . . . . . . . . 7529K4 . . . . . . . 7.60
8.60
7.90
8302K13. . . . . . 12.30
13.60
12.60
1/2 . . . . . . . . . 0.84 . . . . . . . . . . . . . . . 0.38-0.50 . . . . . . . . . 7529K5 . . . . . . . 7.60
8.60
7.70
8302K14. . . . . . 12.30
13.60
12.50
1/2 . . . . . . . . . 0.84 . . . . . . . . . . . . . . . 0.50-0.63 . . . . . . . . . 7529K18S . . 7.60
8.90
7.90
8302K15S . . . 12.40
14.00
12.60
3/4 . . . . . . . . . 1.05 . . . . . . . . . . . . . . . 0.25-0.38 . . . . . . . . . 7529K6 . . . . . . . 7.90
9.30
8302K16. . . . . . 13.20
15.30
3/4 . . . . . . . . . 1.05 . . . . . . . . . . . . . . . 0.38-0.50 . . . . . . . . . 7529K7 . . . . . . . 7.90
9.30
8.50
8302K17. . . . . . 13.20
15.30
13.60
3/4 . . . . . . . . . 1.05 . . . . . . . . . . . . . . . 0.50-0.63 . . . . . . . . . 7529K8 . . . . . . . 7.90
9.30
8.50
8302K18. . . . . . 13.20
15.30
13.60
3/4 . . . . . . . . . 1.05 . . . . . . . . . . . . . . . 0.63-0.75 . . . . . . . . . 7529K9 . . . . . . . 9.80
14.20
8.50
8302K19. . . . . . 15.00
19.10
13.60
3/4 . . . . . . . . . 1.05 . . . . . . . . . . . . . . . 0.75-0.88 . . . . . . . . . 7529K19S . . 10.40
14.20
8.50
8302K21S . . . 15.40
19.10
13.60
14.20 10.60
8302K22. . . . . . 16.80
19.10
17.00
1 . . . . . . . . . . . . . 1.32 . . . . . . . . . . . . . . . 0.50-0.63 . . . . . . . . . 7529K11. . . . . 10.40
15.20 10.60
8302K23. . . . . . 16.80
22.20
17.00
1 . . . . . . . . . . . . . 1.32 . . . . . . . . . . . . . . . 0.63-0.75 . . . . . . . . . 7529K71. . . . . 10.40
90° Elbows
3/8 . . . . . . . . . 0.68 . . . . . . . . . . . . . . . 0.25-0.31 . . . . . . . . . 7466K311 . . 12.60
........
3/8 . . . . . . . . . 0.68 . . . . . . . . . . . . . . . 0.31-0.38 . . . . . . . . . 7466K322 . . 12.60
........
3/8 . . . . . . . . . 0.68 . . . . . . . . . . . . . . . 0.38-0.44 . . . . . . . . . 7466K331 . . 12.60
........
1/2 . . . . . . . . . 0.84 . . . . . . . . . . . . . . . 0.19-0.25 . . . . . . . . . 7466K8 . . . . . . . 12.60
15.40 13.20
8317K2 . . . . . . . . 17.30
18.90
17.80
1/2 . . . . . . . . . 0.84 . . . . . . . . . . . . . . . 0.25-0.38 . . . . . . . . . 7466K1 . . . . . . . 12.60
15.40 13.20
8317K3 . . . . . . . . 17.30
20.00
17.80
1/2 . . . . . . . . . 0.84 . . . . . . . . . . . . . . . 0.38-0.50 . . . . . . . . . 7466K2 . . . . . . . 12.60
15.40 13.20
8317K4 . . . . . . . . 17.30
20.00
17.80
1/2 . . . . . . . . . 0.84 . . . . . . . . . . . . . . . 0.50-0.63 . . . . . . . . . 7466K9S . . . . 12.60
15.40 13.20
8317K5S . . . . . 17.30
20.60
17.80
3/4 . . . . . . . . . 1.05 . . . . . . . . . . . . . . . 0.38-0.50 . . . . . . . . . 7466K3 . . . . . . . 15.20
18.50 16.50
8317K6 . . . . . . . . 20.20
24.30
21.80
3/4 . . . . . . . . . 1.05 . . . . . . . . . . . . . . . 0.50-0.63 . . . . . . . . . 7466K4 . . . . . . . 15.20
18.50 16.50
8317K7 . . . . . . . . 20.20
24.30
21.80
3/4 . . . . . . . . . 1.05 . . . . . . . . . . . . . . . 0.63-0.75 . . . . . . . . . 7466K5 . . . . . . . 15.20
18.50 16.50
8317K8 . . . . . . . . 20.20
24.30
21.80
3/4 . . . . . . . . . 1.05 . . . . . . . . . . . . . . . 0.75-0.88 . . . . . . . . . 7466K11 . . . . . 15.20
18.50 16.50
8317K9 . . . . . . . . 20.40
24.30
21.80
8317K11. . . . . . 30.60
1 . . . . . . . . . . . . . 1.32 . . . . . . . . . . . . . . . 0.50-0.63 . . . . . . . . . 7466K611 . . 23.90
L Prices are approximately 10% lower for 10 or more of the same item. S Cord may have to be stripped to pass through grip.
Straight
Standard
Aluminum
Straight
Standard
Steel
Straight
Standard
Nylon
Straight
Liquid-Tight
Aluminum
90° Elbow
Standard
Steel
90° Elbow
Liquid-Tight
Nylon
Nylon Liquid-Tight Cord Grips (NEMA 6)
Prevent soggy circuits with these black nylon fittings. The Buna-N rubber bushing and O-ring provide liquid-tight
90° Elbow
entry for cable, wire, and tubing. Fittings include nylon locknuts, unless noted. Temperature range is –40° to +212° F.
Flex
Rated NEMA 4X for corrosion protection and NEMA 6 and IP68 for temporary submersion. UL listed (except for 1/4
and 3/8 sizes, which are UL recognized), CSA certified, and CE approved. Flex fittings prevent cable kinking.
Note: Trade size is an industry designation for fittings, not an actual measurement. It also designates
Straight
the NPT (National Pipe Tapered) thread size of the threaded end. When selecting a fitting, match the trade
Standard
size of your knockout.
Trade
Trade
Standard
Flex
Standard
Flex
Size, Thread For Cord
Size, Thread For Cord
Dia.
EachL
EachL
Dia.
EachL
EachL
NPT OD
NPT OD
Straights
Straights (Cont.)
.....
PG-7 . . 0.49 . . . . . 0.08-0.20 . . 69915K46 $2.43 69915K48 $2.73
11/4 . . . . 1.66 . . . . . 0.51-0.79 . . 69915K74 . . $9.17
.....
PG-7 . . 0.49 . . . . . 0.11-0.26 . . 69915K47 2.43 69915K49 2.73
11/4 . . . . 1.66 . . . . . 0.71-0.98 . . 69915K73 . . 9.17
3/8 . . . . 0.68 . . . . . 0.08-0.24 . . 69915K52 . . . . 2.82 69915K62 . . . . 3.24
.....
11/2 . . . . 1.90 . . . . . 0.79-1.02 . . 69915K77 . . 22.05
3/8 . . . . 0.68 . . . . . 0.16-0.31 . . 69915K51 . . . . 2.82 69915K61 . . . . 3.24
11/2 . . . . 1.90 . . . . . 0.87-1.26 . . 69915K75 . . 22.05
.....
1/2 . . . . 0.84 . . . . . 0.20-0.35 . . 69915K54 . . . . 3.24 69915K64 . . . . 3.73
90° Elbows
3/8 . . . . 0.66 . . . . . 0.08-0.24 . . 7008K71 . . . . . . . 9.76 7008K81 . . . . . $10.67
1/2 . . . . 0.84 . . . . . 0.24-0.47 . . 69915K53 . . . . 3.24 69915K63 . . . . 3.73
3/8 . . . . 0.66 . . . . . 0.16-0.31 . . 7008K72 . . . . . . . 9.76 7008K82 . . . . . 10.67
1/2 . . . . 0.84 . . . . . 0.39-0.56 . . 69915K57 . . . . 3.46 69915K67 . . . . 3.97
1/2 . . . . 0.82 . . . . . 0.20-0.35 . . 7008K73 . . . . . . . 11.60 7008K83 . . . . . 13.48
3/4 . . . . 1.05 . . . . . 0.35-0.63 . . 69915K56 . . . . 4.43 69915K66 . . . . 6.36
1/2 . . . . 0.82 . . . . . 0.24-0.47 . . 7008K74 . . . . . . . 11.55 7008K84 . . . . . 13.48
3/4 . . . . 1.05 . . . . . 0.51-0.71 . . 69915K55 . . . . 4.43 69915K65 . . . . 6.36
3/4 . . . . 1.03 . . . . . 0.35-0.63 . . 7008K75 . . . . . . . 19.07 7008K85 . . . . . 20.49
....
1 . . . . . . . . 1.32 . . . . . 0.51-0.79 . . 69915K72 . . . . 7.57
3/4 . . . . 1.03 . . . . . 0.51-0.71 . . 7008K76 . . . . . . . 19.07 7008K86 . . . . . 20.49
....
1 . . . . . . . . 1.32 . . . . . 0.71-0.98 . . 69915K71 . . . . 7.57
L Prices are approximately 15% lower for 10 or more of the same item. Fits 1/4 NPT threads. Locknuts are zinc-plated steel.
Nylon Liquid-Tight Cord Grips with Mesh
Nylon construction, a nitrile/PVC bushing,
and a neoprene O-ring provide a liquid-tight
seal and corrosion resistance. All include a
zinc-plated steel locknut. The mesh is nylon and prevents cable kinking. Temperature
range is –40° to +221° F. Color is gray. UL
listed and CSA certified.
Note: Trade size is an industry designation for
fittings, not an actual measurement. It also designates the NPT (National Pipe Tapered) thread
size of the threaded end. When selecting a fitting, match the trade size of your knockout.
Trade
Size,
Mesh
Straights
NPT
For Cord Dia. Lg.
Each
1/2 . . . . . . 0.38-0.44 . . . . . . . . . 51/2 . . . . 8083K14 . . $46.97
1/2 . . . . . . 0.44-0.50 . . . . . . . . . 51/2 . . . . 8083K15 . . 46.97
3/4 . . . . . . 0.44-0.56 . . . . . . . . . 51/2 . . . . 8083K19 . . 50.70
3/4 . . . . . . 0.50-0.63 . . . . . . . . . 53/4 . . . . 8083K21 . . 50.70
3/4 . . . . . . 0.63-0.75 . . . . . . . . . 9 . . . . . . . . 8083K23 . . 50.70
1 . . . . . . . . . . 0.75-0.88 . . . . . . . . . 8 . . . . . . . . 8083K29. . 66.72
1 . . . . . . . . . . 0.88-1.00 . . . . . . . . . 71/8 . . . . 8083K32. . 66.72
90° Elbows
Each
8083K36. . $64.87
8083K37. . 64.87
8083K42. . 79.89
8083K43. . 79.89
8083K45. . 81.45
8083K52. . 86.40
8083K54. . 86.40
Straight
90°
863