How to make a 3D
Snowflake
Using recycled paper
Step 1.

Using template cut
out 6 additional
squares.
– (Or 5 and use the
template)

Best to choose paper
that is only half
printed on.
Step 2.
Fold paper to make a
triangle and have the
folded part to the
bottom.
 Using scissors cut two
strips along bottom
edge. (don’t cut all
the way to the other
side)
 Once open should
look like so 

Step 3.
Now you want to fold
in the edges and
tape. I use half a
piece of tape and it is
good.
 Flip over and roll on
other side. Flip back
to starting
side and do
last one.

 Do the same to
remaining 5.
Step 4.
Take 3 of your petals and staple together.
 Staple other three together.
 You might need help for this one.

– Take both sides and staple
together.
Use tape pieces to
connect the petals to
one another if they are
floppy.

How to make streamers
Using recycled paper
Step 1.
Ok so the papers that were not good for
the first project can be used here.
 Fold a paper accordion style till it is all
used up.

– Can fold the paper and cut in two or three to
make multiple streamers.
Step 2.

On side with ink draw a pattern that you wish to
use.
– Putting it on this side will make it so that you wont
see any pencil when it is being displayed.

Choose a design that is more of a silhouette.
Otherwise details will be lost.

Good
Bad
Step 3.
Make sure that there is contact to each
side of the paper. This is so they will be
connected.
 Once done cutting unfold and you will
have a streamer.

