Expt. No.: 10
Date:
GENERATE DETAILED 2D ENGINEERING
DRAWINGS OF SIMPLE PARTS FROM 3D SOLID
MODELS, INCLUDING MULTIPLE VIEWS,
DIMENSIONS, AND ANNOTATIONS
Aim:
To generate a detailed 2D engineering drawings of simple parts from 3D solid models, including
multiple views, dimensions, and annotations.
Software /Tool required:
Fusion 360
Diagram (Anyone can be done):
Figure 1
Figure 2
38 | P a g e
Photograph of simulation circuit done in the lab along with its results: (The design made also
to be attached with the report)
Inferences:
Result:
39 | P a g e