Device
Status
Broadband
Home Network
Voice
Firewall
Diagnostics
Configure
Broadband Status
Help
Broadband Connection
Down
Broadband IPv4 Address
0.0.0.0
The Broadband Status page displays statistics,
status, and current parameter settings of the WAN
side of the device. Definitions are given for some of
the more commonly used items. Other items are
highly technical and meant only for use by service
provider technicians.
Gateway IPv4 Address
MAC Address
94:62:69:da:13:d1
Primary DNS
Secondary DNS
Broadband Connection: The status of the device's
WAN connection to the Internet.
Primary DNS Name
Secondary DNS Name
MTU
1500
DSLAM Vendor ID
b5004244434da3b8
Broadband IPv4 Address: The public IP address of
your device, whether dynamically or statically
assigned.
DSL Status
Gateway IPv4 Address: Your ISP's gateway router
IP address.
Line State
Up
Downstream Sync Rate (kbps)
7192
Upstream Sync Rate (kbps)
766
Downstream Max Attainable Rate
(kbps)
21812
Upstream Max Attainable Rate
(kbps)
1207
Modulation
ADSL2+
Data Path
Interleaved
MAC Address: The MAC Address for the WAN side
of the device.
Primary DNS: The IP Address of the Primary
Domain Name Server.
Secondary DNS: The IP Address of the backup
Domain Name Server.
Primary DNS Name: The hostname of the Primary
Domain Name Server.
Secondary DNS Name: The hostname of the
backup Domain Name Server.
Downstream
Upstream
SN Margin (dB)
15.4
16.1
Line Attenuation (dB)
26.0
15.4
DSLAM Vendor ID: If connected to DSL, coded
information about the connected equipment.
Output Power(dBm)
11.2
12.1
Line State: The physical DSL status.
Errored Seconds
0
0
Loss of Signal
0
0
Loss of Frame
0
0
FEC Errors
406
0
CRC Errors
0
0
MTU: Maximum Transmittable Unit before packets
are broken into multiple packets
Downstream Sync Rate: The rate at which your
connection can download (receive) data on your
DSL line.
Upstream Sync Rate: The rate at which your
connection can upload (send) data on your DSL line.
Downstream/Upstream Max Attainable Rates:
The maximum possible bitrates achievable for your
DSL line. Your current Sync rates may be lower due
to the service you have purchased or other factors.
Timed Statistics
Modulation: Method of regulating the DSL signal.
DMT (Discrete MultiTone) allows connections to
work better when certain radio transmitters are
present.
15 Min
Cur Day
Showtime
Last Showtime
Total
Errored Seconds (ES)
0
0
0
0
0
Severely Errored Seconds (SESL)
0
0
0
0
0
Unavailable Seconds (UASL)
0
74
0
0
74
Downstream and Upstream statistics
SN Margin (dB): Signal to noise margin, in decibels.
Reflects the amount of unwanted "noise" on the DSL
line.
FEC Errors
0
406
406
406
406
CRC Errors
0
0
0
0
0
DSL Initialization Timeouts
1
0
0
1
Line Attenuation: Amount of reduction in signal
strength on the DSL line, in decibels.
Output Power: Measure of power output to one
milliwatt.
IPv6
Status
0
Data Path: Type of path used by the device's
processor.
Unavailable
IPv4 Statistics
Transmit Packets
788
Transmit Errors
0
Transmit Discards
0
Transmit Bytes
47280
Receive Packets
0
Receive Errors
0
Receive Discards
0
Receive Bytes
0
PTM Receive PDUs
0
Clear Statistics
© 2018 ARRIS Enterprises, LLC. Intellectual Property.
Map
Errored Seconds: Checking once per second, the
number of times a defect has been detected.
Defects include CRC, LOS, SEF, and LPR.
Loss of Signal: Number of times loss of signal
condition is present for more than 2 consecutive
seconds.
Loss of Frame: Number of times frames have been
received with errors for more than 2 consecutive
seconds.
FEC Errors: (Forward Error Correction
Errors)Number of times received errored packets
were fixed without a retry.
CRC Errors: Number of times CRC(Cyclic
Redundancy Check) errors have been detected in
the data frames.
Timed Statistics: Collection of statistics over
various measured amounts of time.
IPv6: Status items of the IPv6 WAN.
IPv4 Statistics: WAN IPv4 statistics collected since
the last restart of the device.
IPv6 Statistics: IPv6 WAN transmit statistics
collected since the last restart of the device if IPv6 is
enabled.
Site