Mohamed Ashraf
Mohamed.Ashraf.mech@gmail.com
01000318439
13 khan gafer street, Hussein, Cairo, 11675
EDUCATION
o BSC Mechanical power engineering, July 2016, Ain Shams University
Graduation Project: Design and modeling mechanical service of building (HVAC
and Firefighting) with Revit MEP
[Excellent]
o General secondary certification, Khalil agha secondary school
WORK EXPERIENCE
Redcon Construction, MEP BIM ENGINEER
JUL 2019-Present
1- Prepare Study and validation for design, BOQ and specs of MEP Works
2- Prepare BIM models and Shop drawings for many BIM projects
3- Prepare HVAC static Calculations and fire Hydraulic calculations
4- The main projects which worked in it, SODIC, El brouj, and Rutgers school and
Midtown mall
5- Responsible for BIM MEP Technical office and site for engineering in SODIC project.
EEG Consultant, Mechanical Engineer
1- Perform cooling load Estimation and prepare design layout of many commercial
and residential Buildings
2- Design HVAC Duct system and chilled water system of many commercial and
residential Buildings and Make optimum estimation and selection for HVAC system
type, air outlets, smoke ventilation, AHU capacity, type and its components, Chilled
Water Capacity and Type, pumps head and fans Static pressure and types of control
3- Design HVAC and Hood System for many Restaurants and its kitchen and design its
fire suppression system.
4- Prepare Design Specs and BOQ. for many projects
5- Make HVAC Design validation, Duct Resize and Prepare Shop drawings Including
static calculation and system coordination for many commercial Buildings
6- The main projects which worked in it, such as ElGalala university ( Multiple building
such as Admin building, Faculty of dentist, Faculty of science and Physiotherapy), El
Galala Resort, Alameen Hotel, minsters building of New Capital Governmental
District, karz mall, Japanese university (admin Building and FOE), Restaurant of mall
almaza
Nile Technology contacting, Technical Office / Site Mechanical Engineer
1- Prepare HVAC and Smoke Ventilation System design Proposal for multiple
Industrial Projects.
2- Design fire wet sprinkler and alarm system for a warehouse with area 20000m2
and and make proposal for smoke ventilation system using NFPA 92 and
ASHRAE smoke management system .
3- Make CFD Analysis and Smoke Simulation for certain projects such as car
parking warehouse and livestock ship
4- Prepare Shop drawing layout for wet scrubber duct system including its sheet
metal works using AutoCAD and SolidWorks
5- Prepare cooling load estimation for switchboard and driver rooms using Hap and
make selection for the cooling unit
6- Prepare HVAC and firefighting design proposal for multiple rooms of many
industrial building as whitewhale and Makkah industrial
7- Prepare Shop drawing layout for dust collector Duct system including its sheet
metal works using Revit MEP, solidworks and AutoCAD
8- Prepare cooling load estimation and technical offer for cleaning room HVAC
system and prepare Its BMS requirements Proposal
9- Design and Prepare working drawing and construction drawing for dust collector,
wet scrubber using SolidWorks, AutoCAD
10- Design and prepare technical offer for a Fog System (as a cooling system) For
Greenhouse.
Arab Consulting Group, Mechanical Engineer
Jan 2017-April 2018
1- Make HVAC Design Review and Prepare its Shop drawings using AutoCAD,
HAP and Revit MEP for student services building of Japanese university project
2- Prepare Plumbing Shop drawing using Revit MEP for Japanese university project
for a certain buildings (FOE, Library, Lecture hall)
3- Design plumbing system for hikstep and Mohamed nagiub buildings
4- Design Water Supply and Sewage Network systems using AutoCAD, WaterCAD,
SewerCAD for hikstep and Mohamed naguip site.
5- Make Redesign Water Supply and Sewage Network systems for AL Baker site
and make selections for pump
Firefighting engineer (Part time With Dr A.El sheemy)
1- Design fire wet sprinkler system for Baris hospital (hospital, accommodation and
service buildings ) and model it using Revit MEP
2- Design Fire wet and gas system for Al Sebaya Hospital (Hospital buildings and
Service Buildings) and model it using Revit MEP
Design These using NFPA Codes Including hydraulic calculation using elite, pump
selection, pump room detailing with sensing line, water tank, fire sprinkler system,
FM200, CO2, Site Works, hose cabinets, BOQ and model these using Revit MEP
to coordinate these with the other system as HVAC
Instructor
Revit MEP instructor in RTC center
Solidworks instructor in RTC center
2018-present
2015-2016
Funded Works (PreGraduation)
2014-2015
o Design and manufacture Stirling engine (engine which runs with any type of external
heat energy source)
o Design and implement solar collector system
Mini Projects
o Smart farm (System can sense temperature, humidity & acidity)
o Simple HVAC Temperature, pressure and humidity control Module
o Design and Develop Duct sizer software using C#
Trainings
o Suez oil processing company (SOPC)
o Arab contractors
o HVAC system (at Yassin abd el ghaffar hospital)
2014
2014
2013
LANGUAGE SKILLS
o Arabic
o English
[Native]
[Good]
TECHNICAL SKILLS
Computer skills: MS Office (word, excel, PowerPoint), windows, Linux
Design software: AutoCAD, Revit MEP, Solidworks, WaterCad, Ansys, FluidSim, HAP,
Elite, Matlab, EES, CamDuct, Catia
Embedded & Programing languages: Embedded C, C++, java, Matlab, sql
Technical Knowledge: Acoustics & noise control, Hydraulic and pneumatic system, BMS,
Instrumentation, Embedded systems, PLC