Angelantoni Industrie S.p.A. - Steril Division
Export Office
Via Achille Grandi 16, 20017 Mazzo di Rho (MI) – ITALY
+39 02 939 701 43 /
+39 02 939 701 21
Head Quarter
Località Cimacolle 464 – 06056 Massa Martana (PG) - ITALY
+39 075 489551
+39 075 8955200
MVF
LAF MODULAR SYSTEM
ARTICLE DESCRIPTION
MVF2 basic module
HMVF2 half module
MVF3 module
CODE
00260000000
00276000000
00284900000
Introduction
The MVF modules can be variously assembled together to build-up small to room size clean work areas.
The basic module is a self-contained unit including HEPA filter and
fan for delivering class ISO 5 air quality, accordiing to norm ISO EN
14644-1 and can be assembled according to the needs of the clean
area configuration.
The modules bolted together form a network structure to get a stiff
assembling.
Composition of the system
The dimensions of the unit are the following:
HMVF
680 mm
680 mm
500 mm
Depth
Length
Height
MVF2
1360 mm
680 mm
500 mm
Depth
Length
Height
MVF3
Depth
Length
Height
985 mm
985 mm
500 mm
Main characteristics
•
•
•
•
•
TD_MVF_08.doc
Rev. January 08
Made of Stainless Steel AISI 304 L with scotch
brite finishing;
Diffusion and Protection Grid for pre-filter and
HEPA Filter in anodised aluminium;
Modules MVF2 and MVF3 have a double intake
fan rated to deliver 1.200 Nm³/h at air velocity of
0,45 m/s and at max. pressure of 320 Pascal;
Module HMVF has a double intake fan rated to
deliver 550 Nm³/h at air velocity of 0,45 m/s and
at max. pressure of 320 Pascal;
Improved design plenum in negative pressure to
prevent risk that contaminated air might escape
Pag. 1
•
•
•
•
•
•
•
•
•
by-passing filter and to reduce pressure transition losses, noise level and uneven air velocity profile;
Outlet for D.O.P. testing;
Differential manometer outlet;
Differential pressure switch in each module;
Module MVF2 has a HEPA filter rated at 99,995% MPPS (0.3 micron) efficiency (H14 according to EN 1822), with
dimensions 610x1220x66 mm;
Module HMVF has a HEPA filter rated at 99,995% MPPS (0.3 micron) efficiency (H14 according to EN 1822),
with dimensions 610x610x66 mm;
Module MVF3 has a HEPA filter rated at 99,995% MPPS (0.3 micron) efficiency (H14 according to EN 1822), with
dimensions 915x915x66 mm;
All MVF modules are provided of prefilter G 3 according EN 779.
Electrical supply 230 V/50 Hz monophase;
Maximum power consumption for each module 620W;
Control panels
Remote control panel
• AISI 304 stainless steel
• IP 55 protection degree
• Overall dimensions 600 x 600 x 250 (WxDxH)
• General switch with door lock device;
• “ON” (LAF) press button;
• “OFF” (LAF) press button;
• ON/OFF push button for the fluorescent lamp;
• Alarm mute press button;
• Green light of the laminar air flow (if green light flashes the air flow is irregular);
Jolly control set (ABS material)
• Ventilation (LAF) On/Off
• Light On/Off
• Fan velocity manual adjusting trimmer
• Available on the panel remote
Norms and directive
The MVF Modules are designed according to the following standards and directives:
•
EN 60204-1
•
LVD-Directive 72/23/EEC-93/68/EEC
IMPORTANT !!
The system we produce, according to the above statements, are manufactured in compliance with the laws on safety
into force. Particularly, it is manufactured in compliance with Art. 6 Dlgs 626/94 and its modification (Italian law in
compliance with European Directive EEC 89/391) on the DUTY OF DESIGNERS, OF MANUFACTURERS, OF
SUPPLIERS AND INSTALLATORS. The system is NOT submitted to the directive EEC 93/42 on Medical Devices, as
indicated in the definition of “Medical Devices” reported in art. 1 point 2a of the Directive mentioned.
STERIL IS NOT responsible for damages to people and objects due to a non proper use of the system, and due to a fail
to comply with the user instructions and maintenance that is always supplied with the system.
Performances
•
•
Air velocity measured at a distance of 300 mm: 0.45 m/s ± 10%;
Contamination Class of the area under the laminar airflow: ISO 5 in “as built” conditions, according to norm ISO EN
14644-1.
TD_MVF_08.doc
Rev. January 2004
Pag. 2
Tests control
In our Quality Control Dept., according to our procedure WI-MFG-006 included in the Quality manual of Steril
Equipment Division. The Quality System of Steril S.p.A. Equipment Division is certified in compliance to EN ISO 90012000 with a Certificate n° CERT-00669-95-AQ-MIL-SINCERT/B released by “DNV – Det Norske Veritas”. On request,
validation tests at site with IQ/OQ protocols are available.
COMISSIONING (on request)
STERIL will carry out the start-up at Client’s site with the following controls:
• check of the laminar air flow velocity;
• check of the air cleanliness according to norm ISO EN 14644-1;
• DOS test on HEPA filters(inerti gas like nitrogen at customer charge);
UTILITIES BATTERY LIMIT
Power lines at Client’s charge.
DOCUMENTATION
•
•
•
Electric diagram;
Maintenance and operator’s manual;
Warranty certificate.
TD_MVF_08.doc
Rev. January 2004
Pag. 3
MVF2 DRAWING
680
1360
40
40
40
500
VISTA FRONTALE
90
112.5
380
VISTA LATERALE
330
DWG N
600
30
1280
57.5
2600.000
40
340
680
89
340
502
89
502
178
502
89
340
340
89
680
40
600
40
1360
480
30
500
1300
30
30
VISTA / SEZIONE FRONTALE
620
680
20
N^ 4 GOLFARI
M12
VISTA DALL'ALTO
A
LETTER
15-4-94
PTIMA EMISSIONE
DATE
SC
DESCRIPTION
AB
BY
CHD
APP.
REVISIONS
APPROVED FOR CONSTRUCTION
PASSACAVO A MEMBRANA
PER ALIM. ELETTR.
MODULO MVF2
DWG. REV.
DATE
SIGNATURE
30
100
NOT SPECIFIED TOLLERANCE :
DIMENSIONI D'
INGOMBRO
cod.= 00260000000
rif. SP.TEC. TOLL-001
PAINTING:
rif. SP.TEC. PAINT-001
THIS DWG.SUPERSEDED BY SCALE
THIS DRAWING IS THE PROPERTY OF STERIL AND IS LENT WITHOUT CONSIDERATION
OTHER THAN THE BORROWER 'S AGREEMENT THAT IT SHALL NOT BE REPRODUCED
100
TD_MVF_08.doc
Rev. January 08
THIS DWG. SUPERSEDES
1:5
COPIED LENT OR DISPOSED OF DIRECTLY OR INDIRECTLY , NOR USED FOR ANY
PURPOSE OTHER THAN THAT FOR WHICH IT IS SPECIFICALLY FURNISHED.
THE APPARATUS SHOWN IN THE DRAWING IS COVERED BY PATENTS .
Pag. 4
DWG.N
2600.000
REV.
A
MVF3 DRAWING
40
40
905
40
30
905
VISTA FRONTALE
90
112.5
380
VISTA LATERALE
330
DWG N
2849.000
57.5
40
492.5
492.5
492.5
492.5
985
985
925
30
40
905
40
30
30
480
VISTA / SEZIONE FRONTALE
20
925
985
500
n^4 fori M12
A
VISTA DALL'ALTO
24-10-97
LETTER
PRIMA EMISSIONE
DATE
SC
DESCRIPTION
AB
BY
CHD
APP.
REVISIONS
APPROVED FOR CONSTRUCTION
MODULO MVF3
passacavo a membrana
per alimentazione elettrica
DWG. REV.
DATE
SIGNATURE
TOLLERANZE NON SPECIFICATE:
DIMENSIONI D'
INGOMBRO
100
rif. SP.TEC. TOLL-001
VERNICIATURA:
cod.= 00284900000
rif. SP.TEC. PAINT-001
THIS DWG.SUPERSEDED BY SCALE
THIS DRAWING IS THE PROPERTY OF STERIL AND IS LENT WITHOUT CONSIDERATION
OTHER THAN THE BORROWER 'S AGREEMENT THAT IT SHALL NOT BE REPRODUCED
THIS DWG. SUPERSEDES
1:5
30
COPIED LENT OR DISPOSED OF DIRECTLY OR INDIRECTLY , NOR USED FOR ANY
TD_MVF_08.doc
Rev. January 2004
100
PURPOSE OTHER THAN THAT FOR WHICH IT IS SPECIFICALLY FURNISHED.
THE APPARATUS SHOWN IN THE DRAWING IS COVERED BY PATENTS .
Pag. 5
DWG.N
2849.000
REV.
A
HMVF2 DRAWING
680
680
40
40
40
500
VISTA FRONTALE
90
112.5
380
VISTA LATERALE
330
DWG N
600
30
600
57.5
2760.000
40
89
89
502
502
89
89
680
40
600
40
680
480
30
500
600
30
30
VISTA / SEZIONE FRONTALE
620
680
20
N^ 4 GOLFARI
M12
VISTA DALL'ALTO
A
LETTER
31-01-95
EMESSO
DATE
SC
DESCRIPTION
BY
CHD
APP.
REVISIONS
APPROVED FOR CONSTRUCTION
PASSACAVO A MEMBRANA
PER ALIM. ELETTR.
MODULO HMVF2
DWG. REV.
DATE
SIGNATURE
30
100
NOT SPECIFIED TOLLERANCE :
DIMENSIONI D'
INGOMBRO
rif. SP.TEC. TOLL-001
PAINTING:
cod.= 00276000000
rif. SP.TEC. PAINT-001
THIS DWG.SUPERSEDED BY SCALE
THIS DRAWING IS THE PROPERTY OF STERIL AND IS LENT WITHOUT CONSIDERATION
OTHER THAN THE BORROWER 'S AGREEMENT THAT IT SHALL NOT BE REPRODUCED
100
PURPOSE OTHER THAN THAT FOR WHICH IT IS SPECIFICALLY FURNISHED.
TD_MVF_08.doc
Rev. January 2004
THIS DWG. SUPERSEDES
1:5
COPIED LENT OR DISPOSED OF DIRECTLY OR INDIRECTLY , NOR USED FOR ANY
THE APPARATUS SHOWN IN THE DRAWING IS COVERED BY PATENTS .
Pag. 6
DWG.N
2760.000
REV.
A
1360
1280
40
40
340
330
PANNELLO MAGNEHELIC
(MAGNAHELIK PANEL)
40
20
92.5
480
540
100
57.5
B
B
VISTA FRONTALE
(FRONT VIEW)
VITE AUTOFIL. TCTCr
n4.2x19
(TCTCr SELF-THREADING SCREW)
1360
MAGNEHELIC
H1
L0
(libero)
(FREE)
TUBETTO EXTRAFLEX
n4/6
680
(EXTRAFLEX BAROMETRIC PIPE)
PORTAGOMMA PK5
(CONNECTOR)
PANNELLO MAGNEHELIC
(MAGNAHELIK PANEL)
SEZIONE "B-B"
(SECTION)
TD_MVF_08.doc
Rev. January 2004
Pag. 7
TD_MVF_08.doc
Rev. January 2004
- L.= 680 mm. - COD: 05260000701
2
- L.= 1330 mm. - COD: 05260000702
3
- L.= 1360 mm. - COD: 05260000703
PART. "X"
3
RONDELLA 10
(WASHER)
2
40
2
89
20
89
21.5
1
89
1360
17.5
MVF2
MVF2
(TE SCREW) VITE TE
M10x20
DADO IN GABBIA M10
(FASTENING NUT)
PART. "X"
3
680
680
1360
PARTICOLARE UNIONE MODULI
PART. "X"
(MODULES FASTENING DETAIL)
Pag. 8