Kestrel Series Polyester Enclosures GOST-K GOST-R 3E Kestrel Series Features/Applications: • The Kestrel series of glass reinforced polyester enclosures available in seventeen sizes in black and gray, provide a high quality maintenance free solution for intermediate electrical junctions. • Where corrosion resistance, impact strength or ingress protection are key factors the Kestrel series is highly recommended. • Black – Kestrel "PKE" series • Gray – Kestrel "POK" series Certifications and Compliances: PKE (black) and POK (gray) sizes: 080806, 081106, 081606, 081906, 121309, 122210, 161610, 162610, 163610, 252613, 254013, 256013, 414013 Enclosure with terminals Ex e ll T5 or T6 to EN 60079-7 Certificate of Conformity: PKE: 94C. 102.961 POK: 94C. 102.962X Empty enclosure Ex e ll to EN 60079-7 Component Certificate: PKE: 93C. 102.959U POK: 93C. 102.960U Other enclosures: Industrial applications Specifications Material Finish ≥1G Ohm PKE ≤1G Ohm Type PKE Black, similar to RAL 9001 Type POK Grey, similar to RAL 7001 Sizes 080806, 081106, 081606, 081906 4 x M4 captive stainless steel screws Sizes 082306 6 x M4 captive stainless steel screws Sizes 165610, 256013 6 x M6 captive stainless steel screws All other sizes 4 x M6 captive stainless steel screws Gasket Cover mounting Box mounting Equipment mounting Ingress protection 3E Surface resistance Glassfiber reinforced polyester (GRP) POK Silicone rubber Sizes 080806, 081106, 081606, 081906, 082306 4 x mounting holes for M4 screws All other sizes 4 x mounting holes for M6 screws Sizes 080806 + 081106 Brass mounting studs for M3 screws Sizes 081606, 081906, 082306 Brass mounting studs for M4 screws All other sizes Brass mounting studs for M6 screws All sizes IP68 to IEC 529 (EN 60529) (4.92ft/ 1 hour) Temperature range –4°F to 131°F (ambient) Impact resistance 7J(Nm) Toxicity Deluge test Halogens and cadmium free Spec. No. ATS01 (excluding size 165610 and 256013) All sizes www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2013 Eaton’s Crouse-Hinds Business 793 Kestrel Series Polyester Enclosures 3E GOST-K GOST-R Options: Assembly Grounding EMC Terminals, Myers Hubs and cable glands fitted to specification. One piece or single brass continuity plate M6/M10 internal/external ground stud. The PKE series can be treated to provide shielding against electromagnetic interference. A = Top B = Bottom C = Left hand side D = Right hand side E = Back Size 080806 Black – Kestrel "PKE" Series Gray – Kestrel "POK" Series Height Width Depth Weight Size 081106 2.95" 3.15" 2.36" 12 oz Height Width Depth Weight Ordering Data Cat. # Cat. # Black (GRP) PKEPE080806 PKEPE081106 Gray (GRP) POKPE080806 POKPE081106 3E Guide to gland entries (Reference only) Max. gland area dimensions through wall or enclosure. Gland sizes (mm) per side (Reference only) Brass glands with 16 locknuts 20 794 2.95" 4.33" 2.36" 14 oz Sides Size Sides Size A+B C+D 1.97" x 1.46" 1.14" x 1.26" A+B C+D 3.15" x 1.46" 1.14" x 1.26" Side A + B Side C + D Side A + B Side C + D 1 1 2 1 1 – 2 – 25 – – – – 32 – – – – 40 – – – – 50 – – – – www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2013 Eaton’s Crouse-Hinds Business Kestrel Series Polyester Enclosures Size 081606 A = Top B = Bottom C = Left hand side D = Right hand side E = Back Black – Kestrel "PKE" Series Gray – Kestrel "POK" Series Height Width Depth Weight 3E GOST-K GOST-R Size 081906 2.94" 6.30" 2.36" 1 lb 1 oz Height Width Depth Weight Ordering Data 2.94" 7.48" 2.36" 1 lb 2 oz Cat. # Cat. # Black (GRP) PKEPE081606 PKEPE081906 Gray (GRP) POKPE081606 POKPE081906 Guide to gland entries (Reference only) Max. gland area dimensions through wall or enclosure. Gland sizes (mm) per side (Reference only) Brass glands with 16 locknuts 20 Sides Size Sides Size A+B C+D 5.12" x 1.46" 1.14" x 1.26" A+B C+D 6.38" x 1.38" 1.14" x 1.14" Side A + B Side C + D 1 5 1 3 – 4 – 25 – – – – 32 – – – – 40 – – – – 50 – – – – Size 121309 Size 122210 Height Width Depth Weight Height Width Depth Weight www.crouse-hinds.com 4.72" 4.92" 3.54" 1 lb 8 oz 3E Side A + B Side C + D 4 4.72" 8.66" 3.74" 2 lb 5 oz Cat. # Cat. # PKEPE121309 PKEPE122210 POKPE121309 POKPE122210 Sides Size Sides Size A+B C+D 3.46" x 2.32" 2.36" x 2.01" A+B C+D 7.16" x 2.48" 2.36" x 2.24" Side A + B Side C + D Side A + B Side C + D 4 2 12 3 2 1 5 1 1 1 4 1 1 – 3 1 – – – – – – – – US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2013 Eaton’s Crouse-Hinds Business 795 3E Kestrel Series Polyester Enclosures GOST-K GOST-R A = Top B = Bottom C = Left hand side D = Right hand side E = Back Size 161610 Size 162610 Black – Kestrel "PKE" Series Gray – Kestrel "POK" Series Height Width Depth Weight Height Width Depth Weight 6.30" 6.30" 3.74" 2 lb 14 oz Ordering Data Supplied with Cat. # Cat. # Black (GRP) PKEPE161610 PKEPE162610 Gray (GRP) POKPE161610 POKPE162610 Guide to gland entries (Reference only) Max. gland area dimensions through wall or enclosure. Gland sizes (mm) per side (Reference only) 3E Brass glands with locknuts 6.30" 10.24" 3.74" 3 lb 12 oz Sides Size Sides Size A+B C+D 4.49" x 2.56" 3.31" x 2.32" A+B C+D 8.42" x 2.56" 3.31" x 2.32" Side A + B Side C + D Side A + B Side C + D 16 6 4 14 4 20 3 2 6 2 25 2 1 4 1 32 2 1 3 1 40 1 – 3 – 50 – – – – Size 163610 Size 165610 Size 252613 Height Width Depth Weight Height Width Depth Weight Height Width Depth Weight 796 6.30" 14.17" 3.74" 4 lb 7 oz 6.30" 22.05" 3.74" 8 lb 2 oz 9.84" 10.03" 4.92" 5 lb 13 oz Cat. # Cat. # Cat. # PKEPE163610 PKEPE165610 PKEPE252613 POKPE163610 POKPE165610 POKPE252613 Sides Size Sides Size Sides Size A+B C+D 12.36" x 2.56" 3.31" x 2.32" A+B C+D 2 (9.41" x 2.56") 3.31" x 2.32" A+B C+D 8.23" x 3.58" 6.85" x 3.39" Side A + B Side C + D Side A + B Side C + D Side A + B Side C + D 20 4 32 4 21 15 10 2 14 2 10 8 7 1 10 1 8 6 5 1 8 1 4 3 4 – 6 – 3 2 – – – – 2 2 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2013 Eaton’s Crouse-Hinds Business Kestrel Series Polyester Enclosures A = Top B = Bottom C = Left hand side D = Right hand side E = Back Black – Kestrel "PKE" Series Gray – Kestrel "POK" Series Size 254013 Size 256013 Height Width Depth Weight Height Width Depth Weight 9.84" 15.75" 4.92" 10 lb Ordering Data Supplied with 9.84" 23.62" 4.92" 12 lb 12 oz Cat. # Cat. # Black (GRP) PKEPE254013 PKEPE256013 Gray (GRP) POKPE254013 POKPE256013 Guide to gland entries (Reference only) Max. gland area dimensions through wall or enclosure. Gland sizes (mm) per side (Reference only) Brass glands with 16 locknuts 20 Sides Size Sides Size A+B C+D 13.94" x 3.58" 6.85" x 3.87" A+B C+D 2 (10.31" x 3.58") 6.77" x 3.38" Side A + B Side C + D 33 15 48 15 18 8 24 8 25 14 6 20 6 32 7 3 10 3 40 5 2 8 2 50 4 2 6 2 Size 252617 15.95" 15.75" 4.92" 12 lb 9 oz Height Width Depth Weight 3E Side A + B Side C + D Size 414013 Height Width Depth Weight 3E GOST-K GOST-R Size 254017 9.84" 10.04" 6.50" 8 lb 8 oz Height Width Depth Weight 9.84" 15.75" 6.50" 11 lb 2oz Cat. # Cat. # Cat. # PKEPE414013 PKEPE252617 PKEPE254017 POKPE414013 POKPE252617 POKPE254017 Sides Size Sides Size Sides Size A+B C+D 13.94" x 3.58" 12.95" x 3.39" A+B C+D 8.23" x 3.58" 6.85" x 3.39" A+B C+D 13.94" x 3.58" 6.85" x 3.39" Side A + B Side C + D Side C + D Side A + B Side C + D 33 30 21 15 33 15 18 16 10 8 18 8 14 13 8 6 14 6 7 6 4 3 7 3 5 4 3 2 5 2 4 4 2 2 4 2 www.crouse-hinds.com Side A + B US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2013 Eaton’s Crouse-Hinds Business 797 3E Kestrel Series Accessories Mounting plates Mounting plates for the PKE, POK series of enclosures manufactured from 2mm zinc coated sheet steel. Ground continuity plates Internal continuity plates manufactured from 0.05" brass, may be used for bonding cable glands in any of the four enclosure faces. 3E 3 mm single brass ground plates Manufactured from 0.19" brass for fitting along sides of enclosure. Ground bar 12 x 0.08" zinc plated steel bar complete with cable clamps having locking tongue which locates in the bar. Bars are secured to base of enclosure either directly to the brass inserts or pillars fitted to brass inserts. Stand off pillars Plated mild steel, supplied in packs of 2. Not suitable for enclosure sizes 080806, 081106, 081606, 081906 or 082306. Type Cat. # Type Cat. # 080806 081106 081606 081906 082306 121309 122210 161610 162610 Type POKZTMP0808 POKZTMP0811 POKZTMP0816 POKZTMP0819 POKZTMP0823 POKZTMP1213 POKZTMP1222 POKZTMP1616 POKZTMP1626 Cat. # 163610 165610 252613 254013 256013 414013 252617 254017 POKZTMP1636 POKZTMP1656 POKZTMP2526 POKZTMP2540 POKZTMP2560 POKZTMP4140 POKZTMP2526 POKZTMP2540 Type Cat. # 080806 081106 081606 081906 082306 121309 122210 161610 162610 Type (long side) POKBSECC1 POKBSECC2 POKBSECC3 POKBSECC31 POKBSECC32 POKBSECC4 POKBSECC5 POKBSECC51 POKBSECC6 Cat. # 163610 165610 252613 254013 256013 414013 252617 254017 POKBSECC7 POKBSECC71 POKBSECC8 POKBSECC9 POKBSECC91 POKBSECC10 POKBSECC8 POKBSECC9 121309 122210 162610 163610 252613 / 252617 254013 / 254017 414013 161610 165610 256013 No. of Poles POKBSECP4S POKBSECP5S POKBSECP6S POKBSECP7S POKBSECP8S POKBSECP9S POKBSECP10S POKBSECP51S POKBSECP71S POKBSECP91S (Vert. bar) Cat. # No. of Poles 121309 122210 161610 162610 163610 165610 252613 254013 256013 414013 252617 254017 Type KBXERHK41 KBXERHK51 KBXERHK52 KBXERHK61 POKERH7 POKERH71 KBXERVK81 KBXERHK81 POKERH91 KBXERHK81 KBXERVK81 KBXERHK81 Cat. # 4 6 6 8 8 8 8 12 12 12 8 12 Height KBXERVK41 KBXERVK41 KBXERVK52 KBXERVK52 KBXERVK52 KBXERVK52 KBXERVK8 KBXERVK8 KBXERVK8 KBXERHK71 KBXERVK8 KBXERVK8 2 2 4 4 4 4 6 6 6 8 6 6 HR 15 HR 30 ACCSOP15 ACCSOP30 0.59" 1.18" Ground pillar kit Brass nickel plated grounding kits comprising of 1 ground bar and 2 pillars. Provide additional grounding facilities within enclosure. Suitable for enclosure sizes 080806, 081106, 081906 + 082306 only. Ground studs Type (short side) Cat. # 121309 POKBSECP4L 122210 POKBSECP5L 162610 POKBSECP6L 163610 POKBSECP7L 252613 / 252617 POKBSECP8L 254013 / 254017 POKBSECP9L 414013 POKBSECP9L 161610 POKBSECP51L 165610 (4 off per box) POKBSECP71L 256013 (4 off per box) POKBSECP91L Type Cat. # Cat. # POKBSEPKIT Type Cat. # M6 Brass M6 Stainless steel M10 Brass M10 Stainless steel ACCBSES M6 KIT ACCS1ESM6KIT ACCBSES M10 KIT ACCS1ESM10KIT Mounting feet Type Cat. # Size Supplied in sets of 4. Complete with mounting screws. MF5 MF6 POKMFKIT5 POKMF KIT6 Small size 080806, 081106, 081606, 081906, 082306 Large & all other sizes 798 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2013 Eaton’s Crouse-Hinds Business Kestrel Series Accessories 3E Dimensions In Inches: Code A B C D E F G H J K L M N P Q R S T W X Y Z 2.95 2.40 2.01 0.83 2.68 2.48 1.77 2.56 1.97 1.30 2.21 0.32 0.34 N/A N/A 2.36 M4 0.32 0.18 0.32 0.35 PKE081106 4.33 2.95 2.40 2.01 0.83 3.86 2.48 1.77 2.56 3.15 1.30 3.39 0.32 0.34 N/A N/A 3.54 M4 0.32 0.18 0.32 0.35 PKE081606 6.30 2.95 2.40 2.01 0.83 5.83 2.48 1.77 2.56 5.19 1.30 5.35 0.32 0.34 N/A N/A 5.47 M4 0.32 0.18 0.32 0.35 PKE081906 7.48 2.95 2.40 2.01 0.83 7.01 2.48 1.77 2.56 6.30 1.26 6.54 0.32 0.34 N/A N/A 6.65 M4 0.32 0.18 0.32 0.35 PKE082306 9.06 2.95 2.40 2.01 0.83 8.58 2.48 1.77 2.56 7.87 1.26 8.11 0.32 0.34 N/A 0.42 8.23 M4 0.32 0.18 0.32 0.35 PKE121309 4.92 4.72 3.54 3.15 0.98 4.29 4.09 3.23 4.33 3.23 2.60 3.66 0.32 0.41 2.05 N/A 3.86 M6 0.61 0.18 0.41 0.43 PKE122210 8.66 4.72 3.74 3.35 1.08 8.03 4.09 3.23 4.33 6.97 2.60 7.40 0.37 0.41 2.05 N/A 7.60 M6 0.61 0.26 0.41 0.43 PKE161610 6.30 1.72 3.74 3.35 0.98 5.51 5.51 4.33 5.79 4.72 3.54 4.72 0.37 0.51 2.99 N/A 5.20 M6 0.79 0.26 0.47 N/A M6 0.79 0.26 0.47 N/A PKE162610 10.24 6.30 3.74 3.35 0.98 9.45 5.51 4.33 5.79 8.66 3.54 8.66 0.37 0.51 2.99 N/A 9.06 PKE163610 14.17 6.30 3.74 3.35 0.98 13.39 5.51 4.33 5.79 12.60 3.54 12.60 0.39 0.51 2.99 N/A 13.07 M6 0.79 0.26 0.47 N/A PKE165610 22.05 6.30 3.74 3.35 0.98 21.26 5.51 4.33 5.79 20.47 3.54 20.47 0.37 0.51 2.99 0.65 20.95 M6 0.79 0.26 0.47 N/A PKE252613 10.04 6.30 4.92 4.53 1.10 9.25 9.06 7.87 9.33 8.47 7.09 8.47 0.37 0.47 3.94 N/A 8.98 PKE254013 15.75 9.84 4.92 4.53 2.68 14.96 9.06 7.87 9.33 14.17 7.09 14.17 0.37 0.51 3.94 N/A 14.65 M6 0.79 0.26 0.47 N/A PKE256013 23.62 9.84 4.92 4.53 1.10 22.84 9.06 7.87 9.33 21.99 7.03 21.99 0.37 0.35 3.94 0.51 22.62 M6 0.79 0.26 0.47 N/A M6 0.79 0.26 0.47 N/A PKE414013 15.75 15.95 4.92 4.53 1.10 14.96 15.16 13.98 15.43 14.17 13.19 14.17 0.37 0.35 9.76 N/A 14.72 M6 0.79 0.26 0.47 N/A PKE252617 10.04 9.84 6.50 6.10 2.68 9.26 9.06 7.87 9.33 8.47 7.09 8.47 0.37 0.51 3.94 N/A 8.98 PKE254012 15.75 9.84 6.50 6.10 2.68 14.96 9.06 7.87 9.33 14.17 7.09 14.17 0.37 0.51 3.94 N/A 14.65 M6 0.79 0.26 0.47 N/A M6 0.79 0.26 0.08 N/A Dimension R: only appears on enclosures with 6 cover mounting screws, dimension is the radius of the center mounting screws. www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2013 Eaton’s Crouse-Hinds Business 799 3E PKE080806 3.15